Powermax 30 Manual Plasma Cutting Machine Reviews
Other Picture
Powermax 30 Manual Plasma Cutting Machine Feature
- Small size and light weight provide excellent portability.
- Tapered 75-degree torch provides excellent arc visibility, control, and access to hard-to-reach applications.
- Boost ConditionerTM compensates for input voltage variations, providing improved performance on low-line voltage, on motor generators and on fluctuating input power.
- Auto-voltage automatically adapts to any incoming power from 120 V - 230 V, single phase
- Plug adapters provide improved versatility from the shop, to home, to the field.
088003 The Powermax30 plasma cutting system is the ultimate system for metal cutting up to 3/8.'' It s designed and built for tough environments but is very compact and weighs only 20 pounds. Boost Inverter technology creates a full 30-amp rated plasma cutter with the most cutting power of any machine operating on household (120V) input power. Features: -30 amps, 2.5 kW output -Auto-voltage circuit -Boosted open circuit voltage -Active electronic pilot arc controller -Consumable holder -Factory pre-set air regulator -No contactors, fuses or mechanical relays -Comfort-molded carry handle -Fold-out cable wrap hooks -Attachable ''bandolier'' for consumable storage -Auto-Voltage -Simple Panel Design with minimum controls -Factory set air regulator -Torch hard-wired to system -IP23CS compliance for resistance to rain damage Hand torch cut capacity: -Recommended: up to 1/4'' (6 mm) at cutting speeds of 33'' (838 mm) per minute -Maximum: up to 3/8'' (10 mm) at cutting speeds of 15'' (381 mm) per minute -Severance: up to 1/2'' (12 mm) at slow speed Includes: -Powermax 30 Power Supply -T30v Torch & 15' Lead Assembly -Spare Consumables -15' Work Cable With Clamp Applications: -Steel construction -Automotive repair and fabrication -HVAC fabrication and installation -Plumbing and sprinkler installation -Commercial kitchen installation -Heavy equipment maintenance -Farm work -Earth-moving -Mining -Metal artwork Specifications: -Input voltages: -120 230 V, 1PH, 50/60Hz -Input current @ 2.49 kW: -120 230 V, 1PH: 26 13.5 A -Output voltage: -83 V -Duty cycle @ 104 F (40 C) @ 30 A: -35pct @ 30 A, 115 V -50pct @ 30 A, 230 V -Output for 100pct duty cycle @ 104 F (40 C): -18 A @ 120 V -21 A @ 230 V -Maximum OCV: -240 V -Gas supply: -Clean, dry, oil-free air or nitrogen -Flow rate minimum: -3.5 scfm @ 65 psi (99.1 l/min @ 4.4 bar) -Flow rate recommended: -4.0 scfm @ 80 140 psi (113.3 l/mm @ 5.5 bar) -Dimensions: -12'' H x 6.6'' W x 14'' D -Weight: -20 lbs (with torch) Backed by Hyperth
Visit Store Now !!
Apr 15, 2011 17:17:08
0 comments:
Post a Comment